10
BlackDiamond PSU Covers
BlackDiamond 8810 PSU Cover
BlackDiamond 8806 PSU Cover
Covers are available to mask the front panels of the installed power supplies in the BlackDiamond 8800
Series switches.
BlackDiamond 8810 PSU Cover
The BlackDiamond PSU cover fits onto the AC power cord management bracket and snaps into place
on the front of the BlackDiamond 8810 switch. The PSU cover kit includes the following parts (
Figure
90: PSU Cover Kit
on page 115):
•
PSU cover
•
AC power cord management bracket with captive retaining screws
Figure 90: PSU Cover Kit
You need a #2 Phillips screwdriver to attach the power cord management bracket to the switch.
After the power cord management bracket is installed, you do not need any tools to attach the PSU
cover.
Installing the BlackDiamond 8810 PSU Cover
To install the PSU cover:
1 If necessary, remove the installed AC cord retainer.
2 Make sure that all required AC power cords are connected to the AC input connectors on the switch.
BlackDiamond 8800 Hardware Install Guide
115
