The 8500-G48T-e I/O module has the following LEDs:
•
Module status
•
Module diagnostics
•
Port status
•
POE Present
For information about the LEDs and their activity on the 8500-G48T-e I/O module, see
I/O Module
LEDs
on page 35.
BlackDiamond 8800 c-Series I/O Modules
The BlackDiamond 8800 c-Series of I/O modules consists of the following:
•
G24Xc (see
G24Xc I/O Module
)
•
G48Tc (see
G48Tc I/O Module
)
•
G48Xc (see
G48Xc I/O Module
)
•
10G4Xc (see
10G4Xc I/O Module
)
•
10G8Xc (see
10G8Xc I/O Module
)
Caution
ExtremeXOS builds earlier than version 12.1 do not support the BlackDiamond 8800 c-Series
modules. If you attempt to install one of these I/O modules before upgrading the software on
your MSM the module will not be recognized by the software and it will not power up. The
following error messages are similar to the messages that may be displayed on the console or
in the log. (Samples represent an unrecognized module in slot 2.)
•
Console:
ERROR: Unknown cardtype in slot 2 - please program the eeprom
•
Log:
<Error: HAL.Card.Error> MSM-A: Unable to read cardtype for slot 2
G24Xc I/O Module
The G24Xc I/O module (
see the following figure
) has 24 unpopulated SFP-based 1-gigabit Ethernet
ports.
Figure 14: G24Xc I/O Module
In the default configuration of the G24Xc I/O module, all ports:
•
Are added to the default VLAN as untagged
•
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The G24Xc I/O module has the following LEDs:
BlackDiamond 8000 Series Modules
BlackDiamond 8800 Hardware Install Guide
25
