9
BlackDiamond AC Power Cord
Retainers
BlackDiamond 8810 AC Power Cord Retainer
BlackDiamond 8806 AC Power Cord Retainer
The AC power cord retainers for BlackDiamond 8800 Series switches hold the power connectors in the
power sockets and prevent accidental disconnection due to earthquakes, vibration, or other
disturbances.
Warning
These BlackDiamond switches do not have a switch for turning the power of the unit on and
off. Power to the switch is disconnected by removing the wall plug from the electrical outlet.
Always be sure that all plugs and electrical outlets are easily accessible.
BlackDiamond 8810 AC Power Cord Retainer
Connect all AC power cords before you install the power cord retainer.
You need a #2 Phillips screwdriver to install or remove the AC power cord retainer:
Installing the BlackDiamond 8810 AC Power Cord Retainer
To install the BlackDiamond 8810 AC power cord retainer:
1 Identify the power outlets on the front of the BlackDiamond 8810 switch (
see the following figure
).
Figure 81: Power Outlets on the BlackDiamond 8810 Switch
BlackDiamond 8800 Hardware Install Guide
109
