Figure 19: G48Te2 I/O Module
You can add an optional S-POE daughter card to the G48Te2 I/O module to provide Power over
Ethernet (PoE) functions in this module. With an installed S-POE card, the ports can deliver PoE to an
attached device, in addition to the usual Ethernet connection, using a single cable. The G48Te2 I/O
module supports the IEEE 802.3af PoE specification.
In the default configuration of the G48Te2 I/O module, all ports:
•
Are added to the default VLAN as untagged
•
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
•
Operate in autonegotiation mode
The G48Te2 I/O module has the following LEDs:
•
PoE present
•
Module status
•
Module diagnostics
•
Port status
For information about the LEDs and their activity on the G48Te2 I/O module, see
I/O Module LEDs
on
page 35.
BlackDiamond 8900 Series I/O Modules
The following 8900 Series I/O modules are available:
•
8900-G48T-xl (see
8900-G48T-xl I/O Module
)
•
8900-G48X-xl (see
8900-G48X-xl I/O Module
)
•
8900-G96T-c (see
8900-G96T-c I/O Module
)
•
8900-10G8X-xl (see
8900-10G8X-xl I/O Module
)
BlackDiamond 8000 Series Modules
BlackDiamond 8800 Hardware Install Guide
29
