Setting Up Copper Tests
36
MAX-610
Test Configuration
Test Configuration
Before performing copper tests, you can set up the software settings and
values for the cables. The MaxTester allows you to save test parameters
and threshold settings to different profiles and reuse them as needed.
The
Test Configuration
menu provides the utilities to
setup test parameters. The MaxTester supports several
types of copper test applications. Test parameters and
thresholds are saved into a test configuration profile. A
Profile Default
is provided with a predefined set of
parameters for all test applications.
Note:
Cable parameters are not included in these profiles
but can be configured in
Setup
.
Select Profile
lists available profiles saved in the
internal memory. The current active profile is
shown in the upper information header.
An asterisk "*" on the currently
Selected Profile
name indicates that
modifications have been made to this profile in the
Threshold
Settings
or parameters of a particular test.
At power up, settings are read from the last loaded profile.
Profile Details
lists the tests for configuration:
Pair Detective
FaultMapper
Auto Test
Multimeter
Noise Tests
Frequency Tests
TDR
