MaxTester Copper Test
173
10 Frequency Tests
The purpose of the frequency tests is to perform VF
(voice frequency) and WB (wide band) level
measurements, calculate the reduction of signal
strength during transmission, measure the balance of
a circuit, count and detect the presence of load coils.
To access frequency tests:
From the
Copper Main
pane, highlight
Frequency
Tests
and press
to open the menu.
Frequency Tests Main Page
The
Frequency
Tests
menu allows you to select and
run the displayed tests:
VF/AC Balance
WB Balance
WB Attenuation
Load Coils
Locator Tone
TX/RX Tone
To start/stop a test:
1.
Press the up/down left/right arrow keys on the keypad to select the
desired test icon.
2.
Press
to confirm your selection.
3.
The test will start automatically if the
Setup
/
Application Settings
-
Test
Startup Mode
is set to
Auto
. If not, press Start/Stop on the keypad.
