Multimeter Tests
MaxTester Copper Test
115
Capacitance/Opens
Capacitance T/R to GND
displays the capacitance value from Tip
or Ring to Ground, in nF/mi ranging from 10.0 to 500.0.
Threshold Settings
button opens a new page that allows you to set the
capacitance/opens threshold for the test.
Result
displays a snapshot of the pass/fail status,
Capacitance
and
Length
for each selected wire pair.
Capacitive Balance
is shown in
%
when
All Pairs
are selected.
Test Status
displays the current state of measurement or an error
message.
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options and use the navigation
keys to scroll through.
4.
Press
to confirm the value.
Continuous
The
Continuous
function measures each pair,
displaying and updating results in
real time
, until you
stop the test. The last valid results then remain
displayed.
Current Group
is the current test group name, for
example
Multimeter
.
Current Test
displays the test being measured.
When FED is
Enabled
, the FED icon and numeric
state are displayed beside the
Current Test
.
Here you can switch to another test from the given
list. However, this action will terminate the
ongoing measurement test.
