Setting Up Copper Tests
76
MAX-610
FED Setup
Note:
For all
FED States
other than
Pass Through
/
Exchange Connect
, the
Dialer
tab is disabled. If the dialer is already running before the test starts,
the dialer will be stopped on entry of the test with a message saying
Dialer
cannot be used, hence dialer will be stopped.
- similar to FaultMapper
test.
FED Factory Default
button allows you to restore the factory defaults
for the following:
Single Test defaults
sets the default FED state values for all the
individual tests, except
Auto Test
.
User Auto Test defaults
sets the default FED state values for
Auto
Test
.
All these options
sets the default FED state values for all tests.
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options and press the
up/down arrow keys to highlight the desired parameter.
4.
Press
to confirm the value.
