Copper Auto Tests
226
MAX-610
POTS Auto Test
POTS Auto Test Threshold Settings
The
Threshold Settings
page allows you to set the
POTS Auto Test Threshold Settings
for the
combination of multiple tests. The threshold values do
not come from individual tests but are unique to
POTS.
Loop DC Current
sets the DC current value for
the wire pair.
Loss
sets the loss value for the wire pair.
Power Influence
sets the power influence value
for the test.
VF Noise
sets the level of voice frequency noise to be used.
VF/AC Balance (Active)
sets the VF/AC longitudinal balance value for
active mode.
Type
is a read-only field displaying the threshold limit: either
Minimum
or
Maximum
.
Enabled
is a read-only field and always
Yes
for all thresholds.
To set threshold values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press
on a value to open the alphanumeric editor screen and use
the navigation keys to scroll through.
3.
Press
to select each value and use the function keys to complete
your selection.
4.
Press
to confirm and close your selections.
