MaxTester Copper Test
93
7
Multimeter Tests
The purpose of the multimeter tests function is to detect AC/DC voltages
and currents, and measure resistance and capacitance in a loop. These
tests allow you to make basic electrical safety checks (AC volts), check for
crossed
or coupled battery voltages, assess basic loop continuity and
quality with resistance measurements, and measure total electrical length
with capacitance.
To access Multimeter tests:
From the
Copper Main
pane, highlight
Multimeter
and press
to open
the
Multimeter
menu.
Multimeter Main Page
The
Multimeter
menu allows you to select and run
the displayed tests:
Voltage
Current
Resistance
Resistive Balance
Isolation
Capacitance
/
Opens
Station Ground
Stressed Balance
To start/stop a test:
1.
Press the up/down left/right arrow keys on the keypad to select the
desired test icon.
2.
Press
to confirm your selection.
3.
The test will start automatically if the
Setup
/
Application Settings
-
Test
Startup Mode
is set to
Auto
. If not, press Start/Stop on the keypad.
