EXFO MaxTester Max-610 User Manual Download

Page: 41 / 281

Setting Up the MaxTester MAX-610

MaxTester Copper Test

Upload Setup

The following parameters are available only when

Access Mode

Static



IP Address

is the address for the unit that is actively connected to

your network or the internet at the time of login.



Gateway

is the IP address of the default gateway.



Subnet Mask

is the network address used to identify if the IP

address is within the same wide area network.



DNS1

is the address of the primary domain name server to be used

by the unit. If DNS is unavailable, enter 0.0.0.0.



DNS2

is the address of the secondary domain name server to be

used by the unit. If DNS is unavailable, enter 0.0.0.0.



Restore Default

button allows you to reset the entries to the default

settings.

To configure the setup options:
1.

Press the up/down arrows to select the desired parameter.

Press the left/right arrow keys to view and select the options.

Press

on a value to open a list box of options or the alphanumeric

editor screen and use the navigation keys to scroll through.

Press

to confirm the value.

Summary of Contents for MaxTester Max-610


























































































































































































































































































Search results

Summary of Contents for MaxTester Max-610

Reviews:

Related manuals for MaxTester Max-610

Brands by name

Popular brands

EXFO MaxTester Max-610, User Manual

Search results

Summary of Contents for MaxTester Max-610

Reviews:

Related manuals for MaxTester Max-610

Brands by name

Popular brands