Setting Up Copper Tests
66
MAX-610
Application Settings
Label Customization
Connection
lists the type of cable connection:
T-R-G
or
A-B-E
.
Test Parameters Preset
Power Line Frequency
lists the frequency value of the power line.
Termination Impedance
lists the values for the impedance of the
dummy load connected to the line.
When FED is
Enabled
on the
FED Setup
page, the termination
resistance of the FED is the same as the MaxTester except when
Standard
is set to
ITU
, the termination resistance of the FED will
remain at
120
Ω
since it does not support 135 ohm termination.
Noise Filter
lists the type of noise filters to use.
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options.
4.
Press
to confirm the value.
