EXFO MaxTester Max-610 User Manual Download

Page: 155 / 281

Noise Tests

MaxTester Copper Test

147

Power Influence

Power Influence Threshold Settings

The

Threshold Settings

page allows you to set the

Threshold Power Influence

values for the test.



Type

is the threshold limit: either

Maximum

Minimum



Enabled

is a flag to use the current threshold:

either

Yes

To set threshold values:
1.

Press the up/down arrow keys to highlight the
desired parameter.

Press the left/right arrow keys to view and select
the options.

Press

on a value to open a list box of options or the alphanumeric

editor screen and use the navigation keys to scroll through.

Press

to confirm the value.

Result Details

The

Result Details

read-only page displays the

Power

Influence

value and graph, and the pass/fail status.

Summary of Contents for MaxTester Max-610


























































































































































































































































































Search results

Summary of Contents for MaxTester Max-610

Reviews:

Related manuals for MaxTester Max-610

Brands by name

Popular brands

EXFO MaxTester Max-610, User Manual

Search results

Summary of Contents for MaxTester Max-610

Reviews:

Related manuals for MaxTester Max-610

Brands by name

Popular brands