Frequency Tests
MaxTester Copper Test
199
TX/RX Tone
Receive Tone
The
Receive Tone
(RX) tab allows you to configure
and run a receive tone test, which measures the
frequency and level of incoming signals.
Current Group
is the current test group name, for
example
Frequency Tests
.
Current Test
displays the test being measured.
Here you can switch to another frequency test
from the given list. However, this action will
terminate the ongoing measurement test.
Receive Tone
allows you to select either a
VF
(voice frequency) or
WB
(wideband) signal.
Termination Resistance
lists a resistance value for the termination of
the
Receive Tone
.
Result
displays the values for both the RX
VF
/
WB Level
and
VF
/
WB Frequency
.
Test Status
displays the current state of measurement or an error
message.
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options.
4.
Press
to confirm the value.
