Multimeter Tests
118
MAX-610
Station Ground
Station Ground
The
Station Ground
test measures and displays the
resistance value and pass/fail status of the ground
resistance between the MaxTester and the CO
(Central Office). The test uses Tip (A), Ring (B), and
Ground (Earth) leads and measures isolation
resistance between the wires and to ground.
Current Group
is the current test group name, for
example
Multimeter
.
Current Test
displays the test being measured.
Here you can switch to another
Multimeter
test
from the given list. However, this action will
terminate the ongoing measurement test.
Threshold Settings
button opens a new page that allows you to set the
Ground Resistance Threshold
for the test.
Show hookup diagram on test setup
- If
Yes
, the
Confirmation
page
is prompted before every
Station Ground
test is started. Select
No
to
hide the diagram next time you run the test.
Hookup Diagram
button opens a
Confirmation
page displaying how to connect your leads at the
beginning of the test. The hookup diagram uses
the following graphic and textual components:
Proceed
button closes the hookup diagram
prompt and starts the test.
Cancel
button closes the hookup diagram
prompt only.
