Multimeter Tests
MaxTester Copper Test
119
Station Ground
The
Confirmation
window is prompted before every
Station
Ground
test is started if you selected
Yes
for the
Show hookup
diagram
. You can select
No
to hide the diagram next time you run
the test.
However, you can check the connection
diagram at any time by pressing the
Hookup
Diagram
button. In this case, the test does not
start when you press the
Ok
button to close
the
Confirmation
window.
Test Status
displays the current state of
measurement or an error message.
To select the Station Ground parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options.
4.
Press
to confirm the value.
