Ericsson R380E User Manual Download | Manualshive

Page: 11 / 228

background image

Getting Started

11

Warning!

The mains (power) supply plug may look different

depending on the mains socket in your country. Do not connect the
AC-plug-in unit to any other item than your Ericsson Travel Charger
CTR-10. Do not separate it from the charger when plugged into the
wall socket.

Charging is indicated by:

•

the battery meter on the display pulsing continuously.

•

the indicator on top of the R380e showing a steady red light (or
green, if the R380e is switched on).

Note:

Non-Ericsson batteries are charged slowly for safety reasons.

Note:

If you charge a battery that is empty, or a battery that has not

been used for a long time, there may be a short delay until you get an
indication of charging on the display.

When the battery is fully charged, the battery meter on the display is
shown as full and the indicator on top of the R380e shows a steady
green light.

Tip!

Normal operation is possible during charging. However, this

lengthens the charging time.

Warning!

The mains (power) supply plug attached to your charger

unit may differ depending on the mains socket in your country. Use
only the mains plug that is provided with the Ericsson charger.

Note:

See “BATTERY INFORMATION” on page 211 more

information about battery safety.

When you become a subscriber to a mobile network operator, you are
issued with a SIM card that has a Personal Identity Number, the PIN
code. The SIM card contains your personal subscriber data and must
be inserted into your R380e. The holder for the SIM card is located
underneath the battery.

To insert the SIM card:

1.

Ensure that your R380e is turned off and the flip is closed.

2.

Remove the battery.

The SIM card

«
...
9
10
11
12
13
...
»

Summary of Contents for R380E





































































































































































































































Reviews:

No comments

Related manuals for R380E

Brand: Unihertz Pages: 97

Brand: TCL Pages: 52

Brand: Yota Pages: 104

Brand: Jacob Jensen Pages: 76

Brand: SoftBank Pages: 36

Brand: SBS Pages: 52

Brand: Sony Ericsson Pages: 85

Brand: Tadiran Telecom Pages: 11

Brand: Micromax Pages: 40

Brand: Pantech Pages: 213

Brand: Mocet Pages: 13

Brand: Alcatel Pages: 16

Brand: Samsung Pages: 95

Xenium CT9A9ZBLK

Brand: Philips Pages: 2

Brand: iPRIMUS Pages: 2

Brand: Audiovox Pages: 77

Brand: Zte Pages: 25

Brand: ASPERA Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands