Ericsson R380E, User Manual

Page: 27 / 228

Flip Closed 27
•
Disconnect the microphone (mute function) when a call is in
progress, press and hold.
•
Mute the ring signal during an incoming call.
•
Put the R380e into silent mode, when in the standby mode press
and hold.
Use the phone book shortcut key to:
•
Enter the phone book directly.
Use the numeric keys to:
•
Enter the digits 0 to 9.
•
Enter associated characters or perform an associated function, for
example:
the 0 key, when held down, enters the international character '+'
the 1 key, when held down dials your voice mail.
•
Enter a short-cut to a Phone book entry, press and hold.
Use the star or asterisk key (*) to:
•
Enter the character
*
.
•
Enter a p (pause) character if held down.
Use the hash key (#) to:
•
Enter the character
#
.
•
Terminate the input of pin and security codes.
•
Recall a phone number from the SIM card phone book (enter the
number of the memory position and then press
#
).
When you successfully connect the R380e to your network operator,
the ‘Standby’ display is shown. On the display a number of different
indicators can be shown if activated.
The Standby display has the following sections:
•
Status indicators in the upper and middle sections of the display.
•
Text and digit indicators in the middle section.
•
Connection signal strength and battery power indicators in the
lower section.
Indicators
Ring volume set to 0 . The ringing volume is turned off.
Silent mode . All audible signals are turned off.
Text message received . A message has been received.
Display indicators
NETWORK
18-05-2000
12:00
!