Ericsson iPECS-100, Feature Description And Operation Manual

Page: 340 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
302
4.18 Multi-function Analog Trunk Module (MATM) Service
Description
MATM(Multi-function Analog Trunk Module) can support 5 kinds of CO type. It has 4 kinds of
module in a board for plug-in/off. It can be programmed 5 kinds of CO Type respectively by
programming. EMIU has EMC and EMD, EMC is the continuous signal and EMD is
discontinuous.
– COIU (Central Office Interface Unit)
– EMIU (E&M Interface Unit)
– LDIU (Loop Dial Interface Unit)
– RDIU (Ring Down Interface Unit)
– RU (Ring Unit) : Ring generator option module for RDIU
CO Trunk
Function
Polarity-reverse detection
Ring detection
Loop seizure
Loop dialing
E&M Trunk
Function
E/M line surge protection and over-current protection
E&M Type V (E-line: current detection, M-line: Open or GND)
지원
LD Trunk
Function
Polarity-reverse detection
Polarity-reverse send
Loop seizure
Loop dialing
RD Trunk
Function
Ring detection
Ring send
4.18.1 E&M Trunk Function
Description
There are two kinds of function for 2w or 4w way for E&M. It should have different signal line,
so consist of different h/w interface respectively.
Operation
2W
method
Setting of external analogue
port
1.
Connect as the same port in both case for voice and signal port.
(1:1).
2.
Signal port must be crossed line
.
3.
Be used all ports chosen.
LOOP Example for self testing)
Signal/Voice port 1 <-> Signal/Voice port 3