Ericsson iPECS-100 Feature Description And Operation Manual Download Page 260

Page: 260 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

228

− To request delivery receipt of the message for future, press 5

Once the user has listened to a message that has been marked for receipt, the user that
marked the message will get a new message in their mailbox.

When they access this message a prompt will state:

“message for XXXX (mailbox #) was

listened to on HH:MM MM/DD

”

This message is then treated a normal VM and all options apply.

Conditions

1. This option is only played to the mailbox owner if the mailbox COS allows it.

Programming

Related Features

Hardware

2.73.15 OUTGOING MAILBOX DESTINATION

Description

If a CO/IP incoming, Caller dials "0" when listening to a station

’s VSF mailbox greeting the call

is routed according to the "Outgoing Mailbox Destination" as programmed for the station.

Operation

VSF outgoing mailbox destination call will be routed automatically.

Conditions

1. When a incoming call is routed to a unavailable destination as a outgoing mailbox

destination, Call will be routed to the Attendant.

Programming

STATION

1 STATION ATTRIBUTES (PGM114-BTN19)

Related Features

Hardware

Summary of Contents for iPECS-100

















































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands

Ericsson iPECS-100, Feature Description And Operation Manual

Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands