Ericsson iPECS-100 Feature Description And Operation Manual Download Page 64

Page: 64 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

To activate Call Forward, Remote (Follow-me)

1. Lift the handset or press

[SPEAKER]

button to receive dial-tone

2. Press the

[FWD]

button,

3. Dial Call Forward code

“0”,

4. Dial the station

’s Authorization Code (Station password),

5. Dial Forward condition

(“1”~“4”),

6. Dial the destination station or station group,

Dial CO access code (0, 8xx, 88xx) and desired external phone number.

Press

[SAVE]

button to save.

Press

[SPEED]

button

Dial desired bin number

7. Replace the handset, return to idle.

To deactivate Call forward

1. Press flashing

[FWD]

button, Call Forward will deactivate and the

[FWD]

button

LED is off.

SLT

To activate Call Forward, Unconditional, Busy/No-Answer to an internal number

1. Lift the handset to receive dial tone.

2. Dial Call Forward feature dial code

“554”

3. Dial desired Call Forward code

(“1”~“4”).

4. Dial the destination station, station group or dial CO access code (0, 8xx, 88xx) and

desired external phone number.

5. Momentarily press the hook-switch, receive confirmation tone.

6. Replace the handset, return to idle.

To activate Call Forward to a Speed number

1. Lift the handset to receive dial tone.

2. Dial Call Forward feature access dial code

“554”.

3. Dial Call Forward code

(“6”~“9”),

4. Dial Speed Dial bin number.

5. Replace handset to return to idle.

To activate Call Forward, Remote (Follow-me)

1. Lift the handset.

2. Dial the Call Forward feature code

“554”.

3. Dial Remote Forward code

“0”

4. Dial the station

’s Authorization Code (S Password),

5. Dial Forward condition

(“1”~“4”)

6. Dial the destination station, station group .or dial CO access code (0, 8xx, 88xx) and

desired external phone number.

7. Momentarily press the hook-switch, receive confirmation tone.

8. Replace handset return to idle.

Summary of Contents for iPECS-100

















































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands

Ericsson iPECS-100, Feature Description And Operation Manual

Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands