Ericsson iPECS-100, Feature Description And Operation Manual

Page: 379 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
338
5.26 STATION USER PROGRAMMING & CODES
Description
iPECS Phone users can program an array of functions and features, access status information
and assign special features codes to Flex buttons. The Station User Program Codes used for
these purposes are fixed as listed below.
Code Description Entries
10 Enblock Dial
11x Intercom Differential Ring 1~8
12x CO/IP Differential Ring 1~8
13 ICM Signaling Mode 1: H, 2: T, 3: P
14x Call Coverage Attribute 1~2
15x Station Ring Download 5~ 8 + 00~19
19 Ear Mic Headset 6000 & 7000 phones only
21 Knock down Station COS
22 Restore Station COS Auth code
23 Walking COS Auth code
24 ICR Scenario Scenario Data
25 LIP Phone Statistics Real-time Packet Monitoring
31 Station Msg Wait Retrieve
32 CLI/IP Msg Wait Retrieve
33 Register Authorization Code Auth Code
34 DID Call Wait
35 Exec/Sec MWI 1 On, 0 Off
36 Send SMS message
37 Register Mobile Extension tel number
38 Activate Mobile Extension 1 On, 0 Off
39 Register Mobile Ext CLI tel number
41 Set Wake-Up Time Once/Permanent & Hour/Min
42 Erase Wake-Up Time
51 Custom/Pre-selected Msg 00~20
52 Register Custom Msg (00)
“Msg”
53 Create Conference Room Room number (1~9)
54 Delete Conference Room Room number (1~0)
57 {Call Log Display} button
61 Headset/Speakerphone mode 0:H, 1:S
62 Select Headset Ring type 1:S, 2:H, 3:Both
67 {Call Coverage} button