Ericsson iPECS-100, Feature Description And Operation Manual

Page: 155 / 464

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
134
To page from the mobile extension using the iPECS:,
1. Dial the DID number of the station, the system will check the CLID, answer the call
and the user will receive intercom dial tone.
2. Dials 'paging' code. Then the mobile extension can page.
To Transfer the external user to a conference room when a mobile extension is talking with a
external user:
1. Dial
“*” while on the external call. Then the mobile extension hears a dial tone, and
the external user goes to hold state.
2. The mobile extension A dials 'enter into conf-room' code. Then the external user
enters the conference room.
System
Incoming DID calls are sent to active mobile phones automatically.
The status of Mobile Phone is able to be synchronized by receiving the status data from a
external server in HTTP/XML format.
Conditions
1. When the mobile phone places an external call through iPECS, the CLI of the
corresponding station is used.
2. The Mobile Extension features are supported via system digital (T1 and ISDN) lines
only.
3. Message Wait and Callback cannot be activated to a mobile phone.
4. The Mobile Extension feature is not supported over a distributed networked
environment.
5. When an incoming ISDN DID call is received, the system will access an ISDN line
and place a call to the mobile phone. Thus, an ISDN line must be available for the
system to notify the mobile user of the incoming call.
6. Hold and Transfer Recalls to the mobile phone are sent to mobile phone and the
associated station.
7. ACD, Circular and Terminal Hunt Group calls can be routed to the active Mobile
Extension.
Programming
SYSTEM 1 Mobile Extension Table (PGM 236)
Related Features

DND (Do Not Disturb)

Station Message Wait/Call Back

Attendant Recall

Distributed Control Network

Station User Programming & Codes
Hardware

iPECS Phone