Ericsson iPECS-100 Feature Description And Operation Manual Download Page 361

Page: 361 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

322

To activate ICR call forward:

1. Lift the handset or press the

[SPEAKER]

button to receive a dial tone.

2. Press the [

FWD

] button.

3. Dial the desired Call Forward code (0-4).

4. Dial 587, the Station ICR code.

5. Replace the handset, return to idle.

Conditions

1. Any station allowed access may define scenarios in the station

’s Web portal.

2. The conditions as listed under Call Forward may apply.

Programming

STATION

1 Call Forward (PGM 111-Btn 2)

2 Station Call Forward No Answer Timer (PGM 123-Btn

SYSTEM

1 System Call Forward No Answer Timer (PGM 181-

Btn 1)

Related Features



Call Forward

Hardware



iPECS Phone

Summary of Contents for iPECS-100

















































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands

Ericsson iPECS-100, Feature Description And Operation Manual

Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands