Ericsson iPECS-100 Feature Description And Operation Manual Download Page 173

Page: 173 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

150

To dial using a Station Speed Dial and the LIP 8000 series soft buttons

1. Press the

[DIR]

soft button.

2. Press the

[SPEED]

soft button.

3. Dial the desired bin number.

To program a Station Speed Dial number using the

[SPEED]

button

1. Press the

[PGM]

button.

2. Press the

[SPEED]

button.

3. Dial the Speed Dial bin number.

4. Press the

{CO}/{IP}

{LOOP},

{POOL}

button or dial the CO/IP line/group access

code.

5. Dial the number to be stored.

6. Press the

[SAVE]

button.

7. If desired, enter a name, see alphanumeric entry chart below.

8. Press the

[SAVE]

button.

To program a Station Speed Dial number using the LIP-8000 series soft buttons

1. Press the

[DIR]

soft button.

2. Press the

[SPEED]

soft button.

3. Press the

[ADD]

soft button.

4. Dial the Speed Dial bin number.

5. Press the

{CO}/{IP}

{LOOP},

{POOL}

button or dial the CO/IP line/group access

code.

6. Dial the number to be stored.

7. Press the

[SAVE]

button.

8. If desired, enter a name, see alphanumeric entry chart below.

9. Press the

[SAVE]

button.

SLT

To dial using a Station Speed Dial

1. Lift handset.

2. Dial

‘558’, the SLT Speed Dial access code.

3. Dial the desired bin number.

To program a Station Speed Dial number

1. Dial 561, the SLT Programming code.

2. Dial 558, the SLT Speed Dial access code.

3. Dial the Speed Dial bin number.

4. Dial the CO/IP line/group access code.

5. Dial the number to be stored.

6. Momentarily press the hook-switch.

7. If desired, enter a name, see alphanumeric entry chart below.

8. Momentarily press the hook-switch.

Alphanumeric characters may be entered to name the Speed Dial number using the chart
below.

Summary of Contents for iPECS-100

















































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands

Ericsson iPECS-100, Feature Description And Operation Manual

Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands