Ericsson iPECS-100 Feature Description And Operation Manual Download Page 364

Page: 364 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

325

To activate ICR call forward:

1. Lift the handset or press the

[SPEAKER]

button to receive a dial tone.

2. Press the [

FWD

] button.

3. Dial the desired Call Forward code (0-4).

4. Dial 587, the Station ICR code.

5. Replace the handset, return to idle.

To change Call Profile in Local mode:

1. Press the

[PGM]

button.

2. Dial 26, the Call Profile menu or log on to the Station Web portal.

3. Select Call Profile Table(0-3). cf) (0:Deact 1-3:Call Profile table).

To change Call Profile in Remote mode:

1. Call to iPECS System (DISA CO Line).

2. Enter

“#” to access voice mail box.

3. Enter Station Number.

4. Enter Auth code of station.

5. Enter

“7” to set call forward

6. Enter

“1” to set station call forward.

7. Enter

“Station ICR Code”.

8. Enter

“Call Profile Number” (0:ICR fwd, 1-3:Call Profile fwd).

Conditions

1. This feature is possible only Digital Co line.

2. This feature is applied only incoming call.

3. Ring Assigned feature does not applied with this feature.

4. This feature is applied not only Station Manual Call Forward but also Preset Call

Forward (PGM120).

5. It is recommended hunt group is set last call profile destination.

6. Call Profile timer can be set from 10 sec to 60 sec.

7. First Call Profile timer is always 0 sec regardless of saved value. (A user can

confirm this in station web admin

– Station ICR – Overview)

8. Call Profile timer can be set from 10 sec to 60 sec.

Programming

STATION

1 Call Forward (PGM 111-Btn 2)

2 Station Call Forward No Answer Timer (PGM 123-Btn

SYSTEM

1 System Call Forward No Answer Timer (PGM 181-

Btn 1)

Related Features



Call Forward



Station ICR

Hardware



iPECS Phone

Summary of Contents for iPECS-100

















































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands

Ericsson iPECS-100, Feature Description And Operation Manual

Search results

Summary of Contents for iPECS-100

Reviews:

Related manuals for iPECS-100

Brands by name

Popular brands