Epson SC-T3400 SERIES User Manual Download

Page: 84 / 192

Joining poster sheets with printed borders

Overlapping Alignment Marks

is selected, join

guides (indicated by the lines drawn through and
around the X marks in the illustration below) will be
printed on each sheet.

Note:

If the output is in color, the join guides will be in blue
and the cut guides in red; otherwise, all the guides will
be printed in black.

The following section describes how to join four
printed pages together.

Ready the two top sheets and trim the excess
from the left sheet by cutting along the line
joining the two join guides (the centers of the X
marks).

Lay the upper left sheet on top of upper right
sheet. Lineup the X marks as shown in the
illustration below, and temporarily fasten them
using an adhesive tape on the back.

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Printing with the Printer Driver from Your Computer

Summary of Contents for SC-T3400 SERIES

































































































































































































Search results

Summary of Contents for SC-T3400 SERIES

Reviews:

Related manuals for SC-T3400 SERIES

Brands by name

Popular brands

Epson SC-T3400 SERIES, User Manual

Search results

Summary of Contents for SC-T3400 SERIES

Reviews:

Related manuals for SC-T3400 SERIES

Brands by name

Popular brands