manualshive.com logo in svg

Epson SC-T3400 SERIES, User Manual

The Epson SC-T3400 SERIES Operator's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for operating your Epson SC-T3400 printer efficiently. Enhance your printing experience by accessing the manual from manualshive.com today.

Share
Download
background image

Notes on Usage and
Storage

Installation space

Make sure that you secure the following space, clear of
any other objects, so that paper ejection and
consumable replacement are not obstructed.

See the “Specifications Table“ for the external
dimensions of the printer.

U

 

“Specifications Table” on page 185

SC-T5400 Series/SC-T3400 Series

W

D

H

SC-T5400

Series

1535 mm

1350 mm

1210 mm

SC-T3400

Series

1230 mm

1350 mm

1210 mm

SC-T3400N Series

W

D

H

SC-T3400N

Series

1230 mm

1288 mm

735 mm

Notes when using the printer

Note the following points when using this printer to
avoid breakdowns, malfunctions, and print quality
decline.

❏

When using the printer, observe the operating
temperature and humidity range described in the
"Specifications Table".

U

 

“Specifications Table” on page 185

Even when the conditions above are met, you may
not be able to print properly if the environmental
conditions are not suitable for the paper. Be sure
to use the printer in an environment where the
paper's requirements are met. For more details,
see the documentation supplied with the paper.
Also, when operating in dry areas, air conditioned
environment, or under direct sunlight, maintain
the appropriate humidity.

❏

Do not install the printer next to heat sources or
directly in the path of air from a ventilator or air
conditioner. Failure to observe this precaution
could result in the print head nozzles drying and
clogging.

❏

The print head may not be capped (i.e., may not
move to the right-hand side) if an error occurs
and the printer is turned off without first resolving
the error. Capping is a function for automatically
covering the print head with a cap (lid) to prevent
the print head from drying out. In this case, turn
on the power and wait a while until capping is
performed automatically.

❏

When the power is on, do not remove the power
plug or cut the power at the breaker. The print
head may not be capped properly. In this case,
turn on the power and wait a while until capping
is performed automatically.

❏

The printer may automatically perform print head
cleaning to maintain good printing quality. Please
wait until cleaning finishes without opening any of
the covers or turning off the power.

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series     User's Guide

Introduction

 

17

Summary of Contents for SC-T3400 SERIES

































































































































































































Reviews:

No comments

Related manuals for SC-T3400 SERIES

Epson P6000 - Multimedia Photo Viewer Brochure & Specs preview
P6000 - Multimedia Photo Viewer
Brand: Epson Pages: 6
Epson Stylus Pro GS6000 Setup And Use Manual preview
Stylus Pro GS6000
Brand: Epson Pages: 128
Epson P6000 - Multimedia Photo Viewer User Manual preview
P6000 - Multimedia Photo Viewer
Brand: Epson Pages: 113
Epson P7000 - Multimedia Photo Viewer User Manual preview
P7000 - Multimedia Photo Viewer
Brand: Epson Pages: 116
Epson C11CF85403 User Manual preview
C11CF85403
Brand: Epson Pages: 242
Epson Stylus Pro GS6000 Service Manual preview
Stylus Pro GS6000
Brand: Epson Pages: 298
Epson Stylus Pro GS6000 Installation Manual preview
Stylus Pro GS6000
Brand: Epson Pages: 2
Wang 2272 Product/Maintenance Manual preview
2272
Brand: Wang Pages: 106
Weidmuller MCP Basic 2 Operating Instructions Manual preview
MCP Basic 2
Brand: Weidmuller Pages: 308

Brands by name

Popular brands

Load more brands