Settings item
Settings value
Explanation
Select Palette
Software
*
From the following selections, choose the palette that specifies the color
and thickness of the logical pen.
❏
Software: Print according to the pen configuration set in the
application, and ignore the built-in palette of the printer.
❏
Default: Print according to the settings of the built-in palette of the
printer specified in advance. The settings of the palette cannot be
changed. The built-in palette specifies a logical pen with a pen width
of 0.35 mm and 256 colors.
❏
Palette A / Palette B: Print according to the settings of the built-in
palette that you specified for Define Palette. If Define Palette setting
is not set, the results are the same as when Default is selected.
When Default / Palette A / Palette B are set, the pen configuration set in
the application is ignored. Selected palette settings can be printed with
Print Color Palette
and confirmed.
Default
Palette A
Palette B
Print Color Palette
Settings of the palette selected in
Select Palette
are printed as A3 size.
You can check the colors corresponding to the color number for the pen
colors.
Define Palette
Palette A
Pen 0toPen 15
Pen Width
0.13 to 12.00 mm
In
Select Palette
, selecting
Palette A
will print in accordance with the
settings defined here.
You can define a unique built-in palette by specifying the pen width and
color for the 16 types of logical pen. Select the pen number, and then
define the pen width and pen color for each pen. You can use
Print Color
Palette
to print and check the colors corresponding to the color number
for the pen colors.
Pen Color
0 to 255
Palette B
Pen 0toPen 15
Pen Width
0.13 to 12.00 mm
In
Select Palette
, selecting
Palette B
will print in accordance with the
settings defined here.
Settings details are the same as for Palette A.
Pen Color
0 to 255
Restore default
HP-GL/2 Unique Set‐
tings
No
Select
Yes
to restore all HP-GL/2 Unique Settings settings to the default
settings.
Yes
Memory Device Inter‐
face
Enable
*
Select whether to permit (Enable) or not permit (Disable) connecting a
USB flash memory to the printer and then directly printing the data in the
memory.
Disable
Thick Paper
Off
*
If the paper is thick, the print head may scuff the print surface. Choose
On
to prevent scuffing. If
On
is set, the platen gap, which is the distance
between the print head and paper, will widen. However, if the platen gap
is already at its maximum, then setting this to
On
will have no effect.
On
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
132
