Epson SC-T3400 SERIES User Manual Download | Manualshive

Page: 144 / 192

background image

Replacing
Consumables

Handling of Used
Consumables

If using the printer in an office or other business,
dispose of used consumables in accordance with laws
and regulations, such as by contracting an industrial
waste disposal company.

If using the printer in a domestic situation, place these
in a plastic bag, then dispose of in accordance with
laws and regulations as well as regional ordinances,
and as directed by local government.

Replacing Ink Cartridges

If any of the ink colors remaining amount falls below
the minimum amount, printing will not be possible.

If an ink cartridge remaining amount falls below the
minimum amount, you can continue printing after
replacing the ink cartridge.

If the remaining ink amount drops yet printing is
continued, then replacement of an ink cartridge
during printing may be required. When replacing ink
during a print job, you may see a difference in color
depending on the drying conditions. When this is not
permissible, we recommend first replacing the ink
cartridge with a new one before printing. The removed
ink cartridge can be installed again and used until the
remaining amount falls below the minimum amount.
However, if an ink cartridge with not much ink
remaining is removed and reinstalled, it may not be
usable because some ink is consumed to ensure the
reliability of the printer.

Supported ink cartridges

U

Consumable Products” on page 169

c

Important:

Epson recommends the use of genuine Epson ink
cartridges. Epson cannot guarantee the quality or
reliability of non-genuine ink. The use of
non-genuine ink may cause damage that is not
covered by Epson‘s warranties, and under certain
circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may not
be displayed, and use of non-genuine ink is
recorded for possible use in service support.

Note:

You can replace the ink cartridges while viewing the
procedure on the screen. To view the procedure on the
screen, touch

Settings

-

Maintenance

-

Ink

Cartridge(s) Replacement

from the Home screen.

A

Make sure the printer is on.

B

Open the cartridge cover.

C

Remove the new ink cartridge from the bag.
Shake the ink cartridge for 10 seconds 30 times
horizontally in approximately 5 cm movements
as shown in the illustration.

SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide

Replacing Consumables

144

«
...
142
143
144
145
146
...
»

Summary of Contents for SC-T3400 SERIES

































































































































































































Reviews:

No comments

Related manuals for SC-T3400 SERIES

iPF8400SE imagePROGRAF

Brand: Canon Pages: 44

iPF720 - imagePROGRAF Color Inkjet Printer

Brand: Canon Pages: 204

iPF8000 - imagePROGRAF Color Inkjet Printer

Brand: Canon Pages: 1

iPF720 - imagePROGRAF Color Inkjet Printer

Brand: Canon Pages: 620

iPF9000 - imagePROGRAF Color Inkjet Printer

Brand: Canon Pages: 4

Brand: Canon Pages: 328

iPF8400S Series

Brand: Canon Pages: 312

iPF5000 - imagePROGRAF Color Inkjet Printer

Brand: Canon Pages: 2

iPF5000 - imagePROGRAF Color Inkjet Printer

Brand: Canon Pages: 390

Brand: Creation Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands