Settings item
Settings value
Explanation
Paper Size Check
On
*
Select whether to detect (On) or not detect (Off) the paper width when
paper is loaded. Try choosing Off if a paper setting error is displayed even
though the paper is correctly loaded. Note, however, that the printer may
print outside the paper when Off is selected. If it prints beyond the edges
of the paper, the inside of the printer becomes dirty with ink. We
generally recommend using the printer with this set to On.
The changes are applied after the paper is reloaded. Note that they are
not applied if you just change the menu items.
Off
Auto Cut
On
*
Select whether to automatically cut (On) or not cut (Off) using the built-in
cutter as each page is printed on roll paper. Set On to automatically cut
the edge if it is not a horizontal cut when paper is loaded.
The setting selected with the printer driver takes priority when the
printer driver is used.
U
“Cutting the Roll Paper” on page 31
Off
Remove Skew
On
*
Select whether to enable (On) or disable (Off) paper skew reduction.
Off
Restore Default
Restore the selected Custom Paper settings to default settings.
Printing Language
USB
Auto
*
Normally, leave the setting as Auto. If HP-GL/2 or HP RTL print data is sent
from a CAD application or plotter, this is automatically determined, and
switched to HP-GL/2 mode.
If HP-GL/2 mode printing is not carried out normally, or if normally
printing in HP-GL/2 or HP RTL, set as
HP-GL/2
.
HP-GL/2
Network
Auto
*
HP-GL/2
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
126
