Settings item
Settings value
Explanation
Page Margin
3 mm
*
Select the top, bottom, left, and right margin values.
For a cut sheet, the top, bottom, left, and right margin values are 3 mm
regardless of the settings.
5 mm
Smoothing
On
This setting is enabled when
Resolution
is set to
Standard
and there is
no resolution specification in the sent print data. Setting this to
On
will
print at the maximum resolution corresponding to the Paper Type setting
for the paper selected in
Paper Source
, but depending on the data, this
may result in a long print time, or failures in printing because of
insufficient memory.
Off
*
Base Output Size
Auto
*
The hard clip area of the PS command of the data becomes the base
output size. The actual output size depends on the Page Margins option.
When the data does not contain a PS command, the smallest rectangle
area
of in the following illustration including the print object
becomes the base output size.
A Series
The compatible standard sizes for the selected
Paper Source
are
displayed, therefore select the Base Output Size. The actual output size
depends on the Page Margins option.
For a cut sheet, this setting is available only when the data does not
contain a PS command. If the data contains a PS command, this setting is
not available, and the hard clip area of the PS command becomes the
Base Output Size.
US-ANSI
US-ARCH
B Series (ISO)
B Series (JIS)
Others
User-Defined
Select this option when outputting at non-standard sizes. After selecting
this setting, set Paper Width and Paper Height. You can set in 0.1 mm
increments.
The actual output size depends on the Page Margins option.
SC-T5400 Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
129
