manualshive.com logo in svg

Epson EQUITY 3865X/20 PLUS, User Manual

The Epson EQUITY 3865X/20 PLUS offers exceptional performance and versatility, making it a perfect choice for various computing needs. With its user-friendly interface, detailed User Manual can be easily downloaded for free from our website, ensuring seamless operation and enhancing your overall experience.

Share
Download
background image

Note
If the arrow keys on the numeric keypad do not appear to
work, num lock mode may be enabled (turned on). If the

Num Lock 

indicator in the upper right comer of the

keyboard is lit, press 

Num Lock 

once to turn it off and enable

the arrow keys on the numeric keypad. If you need to enter

numbers while using the Setup program and you want to use

the numeric keypad, press 

Num Lock 

to turn it back on.

Follow the instructions in the rest of this chapter to use the
Setup program to define your computer’s configuration.

Setting the Display Adapter Type

The Setup program can usually detect the exact type of display
adapter you are using with your computer. If you have connected
a VGA monitor to the built-in VGA port, Setup automatically
sets the display adapter type. (With this option you select the
type of display adapter you are using-not the type of monitor.)

If you have installed a display adapter card-or you just want to
check the display adapter setting-follow these steps.

Note

If you have installed an EGA or VGA display adapter card, or
another type of card that you want to be the primary display
adapter, you must set jumper J2 on the main system board to
disable the built-in VGA interface.

If you have installed one or more video cards, you also may

need to set jumper J1 to tell the computer the type of monitor
you are using: either monochrome or color. If you have two

types of cards, set the jumper to indicate which one is your
primary monitor type. See Chapter 6 for instructions on
changing jumper settings.

2-6 Running the Setup Program

Summary of Contents for EQUITY 3865X/20 PLUS














































































































































































































































































Reviews:

No comments

Related manuals for EQUITY 3865X/20 PLUS

Canon Cat Reference Manual preview
Cat
Brand: Canon Pages: 160
Igel UD7 Series Specifications preview
UD7 Series
Brand: Igel Pages: 2
Cobalt Digital Inc HPF-9000 Product Manual preview
HPF-9000
Brand: Cobalt Digital Inc Pages: 54
C&T VCO-6000 User Manual preview
VCO-6000
Brand: C&T Pages: 99
IBM 6275 - PC 300 GL Technical Information Manual preview
6275 - PC 300 GL
Brand: IBM Pages: 88
Radio Shack 1750L Owner'S Manual preview
1750L
Brand: Radio Shack Pages: 52
CyberResearch CYRAQ PPC Series User Manual preview
CYRAQ PPC Series
Brand: CyberResearch Pages: 103
Advantech UNO-3072A User Manual preview
UNO-3072A
Brand: Advantech Pages: 84
Digital Equipment FR-856E*-WB Service Maintenance Manual preview
FR-856E*-WB
Brand: Digital Equipment Pages: 74
Lanoptik MV60 User Manual preview
MV60
Brand: Lanoptik Pages: 16
Fairlight CMI Series III Service Manual preview
CMI Series III
Brand: Fairlight Pages: 439
Aaeon BOXER-8253AI User Manual preview
BOXER-8253AI
Brand: Aaeon Pages: 43
Vivo DESK-V000EB Instruction Manual preview
DESK-V000EB
Brand: Vivo Pages: 3
Dick Smith System 80 Technical Manual preview
System 80
Brand: Dick Smith Pages: 134
Dell Precision R5400 User Manual preview
Precision R5400
Brand: Dell Pages: 111
Dell OptiPlex GXi Service Manual preview
OptiPlex GXi
Brand: Dell Pages: 147
Tek Panel LCD Computer and Touchscreen Specification preview
LCD Computer and Touchscreen
Brand: Tek Panel Pages: 2
Sony Vaio VPCJ115FX/B Specifications preview
Vaio VPCJ115FX/B
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands