Indicator
Cause
Remedy or Status
LCD Display
Power
Status
Laser
Temp
Filter
Blue -
Flashing
Status
varies
Status
varies
Status
varies
Orange -
On
Low Air Flow
This is not an error. However, projection stops automatically if the airflow falls
any further.
The message "The air filter is clogged. Clean or replace the air filter." is displayed.
Check the following two points.
Check that the air filter and air exhaust vent are clear, and that the projector is
not positioned against a wall.
If the air filter is clogged, turn off the power, remove the power cord from the
electrical outlet, and then clean or replace them.
s
"Cleaning the Air Filter and Air Intake Vent"
s
If the error continues after checking the points above, stop using the projector,
remove the power plug from the electrical outlet, and contact your local dealer or
the nearest address provided in the Epson Projector Contact List.
s
Airflow Decline
Status
varies
Status
varies
Status
varies
Status
varies
Orange -
Flashing
Air Filter Notice
"Time to clean the air filter. Clean or replace the air filter." is displayed.
Turn off the projector's power, unplug the power cord from the electrical outlet,
and then clean the air filter.
s
"Cleaning the Air Filter and Air Intake Vent"
The indicators or messages regarding air filter notice are displayed only when
Air Filter Notice
is set to
On
in the Configuration menu.
s
Extended
-
Display
-
Air Filter Notice
Clean Filter
Status
varies
Status
varies
Orange -
Flashing
Status
varies
Status
varies
Constant Bright‐
ness End
Ends the
Constant Brightness
mode in
Brightness Settings
.
s
ConstBRT Expired
Reading the Indicators
180
Summary of Contents for EB-L30000U
