Epson EB-L30000U, User Manual

Page: 126 / 283


If you must set addresses manually, select IP Settings to set the
DHCP setting to Off , and then enter the projector's IP Address ,
Subnet Mask , and Gateway Address as necessary.

If you want to connect the projector to the network using IPv6,
select
IPv6 Settings .
s
"Wireless LAN menu" p.154
k
To prevent the SSID or IP address from being displayed on the
LAN standby screen, set the
SSID Display setting or the IP
Address Display setting to Off .
l
If you have finished making settings, select Setup complete .
Follow the on-screen instructions to save the settings and close
the menu.
m
Press the [LAN] button on the remote control.
The wired network settings complete when you see the correct IP
address on the LAN standby screen.
When you have finished making wireless settings for your projector, you
need to select the wireless network on your computer. Then start the
network software to send images to your projector through a wireless
network.
Selecting Wireless Network Settings in Windows
Before connecting to the projector, select the correct wireless network on
your computer.
a
To access your wireless utility software, double-click the network
icon on the Windows taskbar.
b
When connecting in Advanced connection mode, select the
network name (SSID) of the network the projector is connecting
to.
c
Click Connect .
Selecting Wireless Network Settings in Mac
Before connecting to the projector, select the correct wireless network on
your computer.
a
Click the AirPort icon on the menu bar at the top of the screen.
b
When connecting in Advanced connection mode, make sure
AirPort is turned on and select the network name (SSID) of the
network the projector is connecting to.
Wireless Network Projection
126