Epson EB-L30000U, User Manual

Page: 63 / 283

a

When you want to re-adjust the projection position and so on, if
you want to release the correction status temporarily, set the
Geometry Correction to Off . Even when it is set to Off , the
correction values are saved.
s
Settings - Geometry Correction p.145

You can save the geometry correction settings using Memory in
Geometry Correction , and load them when needed.
s
"Memory Function" p.109

You can also make settings from the Configuration menu.
s
Settings - Geometry Correction p.145
H/V-Keystone
This allows you to correct distortion in the horizontal and vertical
directions independently.
Use the following to check the adjustment range for the image.
s
"H/V-Keystone" p.259
a
Press the [Geometry] button while projecting.
b
Select H/V-Keystone , and then press the [ ] button.
When the message "If this setting is changed, the image may be
distorted." is displayed, press the [
] button.
c
Use the [ ][ ] buttons to select the correction method, and
then use the [ ][ ] buttons to make the corrections.
Adjusting Projected Images
63