Epson EB-L30000U, User Manual

Page: 3 / 283

Make sure you read the following before you use the projector.
s
Safety Instructions
Warning and Cautions on Installation
Warning

This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.

Do not use or install the projector where it may be subject to water or rain,
or high humidity, such as outdoors, in a bathroom, or shower room, and so
on. Otherwise, it could cause a fire or electric shock.

Do not install in locations where salt damage could occur, or in locations
subject to corrosive gas such as sulphuric gas from hot springs. Otherwise,
corrosion could cause the projector to fall. It could also cause the projector to
malfunction.

Note the following points when installing on a ceiling (ceiling mount) or in a
high location. If installation work is not carried out correctly, the projector
could fall down. This may result in injury or accidents.
- Since special techniques are required to install the projector on a ceiling
and to handle the ceiling mount, make sure you contact a professional.
- Secure the mount with bolts using the handle securing section (6
points) on the top or base of the projector.
- To prevent the projector from falling, thread sufficiently strong wire
rope and so on through the ceiling mount and secure to the ceiling.

Do not place flammable objects in front of the lens. If you set the schedule to
turn on the projector automatically, any flammable objects placed in front of
the lens could cause a fire.
Warning

Do not tie the power cord and other connection cables together. Otherwise, it
could cause a fire.

Only use the specified power-supply voltage. Otherwise, it could cause a fire
or electric shock.

Be careful when handling the power cord. Otherwise, it could cause a fire or
electric shock. Note the following when handling the power cord.
- Do not plug multiple power cords in a single electric outlet.
- Do not plug in the power cord if there are any foreign substances, such
as dust, stuck to it.
- Make sure you insert the power cord all the way in.
- Do not plug in or unplug the power cord with wet hands.
- Do not pull the cord when unplugging the power cord. Make sure you
hold it by the plug.

Do not use a damaged power cord. Otherwise, it could cause a fire or electric
shock. Note the following when handling the power cord.
- Do not alter the power cord.
- Do not place any heavy objects on the power cord.
- Do not bend, twist, or pull the power cord forcibly.
- Do not layout the power cord near a heating device.
Safety Warning and Cautions
3