Submenu
Function
Voltage Warning Info
Displays a warning regarding the power
voltage.
Temp Warning Info
Displays a high temperature warning. When
you select
Detail
when a Warning or Error is
displayed, you can check detailed logs for
before and after the error was detected.
Power On/Off History
Displays the power on/off logs.
Reset Menu
Submenu
Function
Reset All Memo‐
ries
Resets all names and settings saved in
Memory
,
Lens Position
,
and
Geometry Correction
.
s
Submenu
Function
Refresh Mode
Make settings related to the Refresh Mode.
Timer
: Select when to run Refresh Mode.
Messages
: Select whether or not to display messages during
refresh operations.
Start
: Removes any afterimages (screen burn-in) that remain
in the projected image. The projector turns off once the set
time has elapsed. When you press any button on the remote
control, a message is displayed asking if you want to continue
using Refresh Mode. When you press any button on the
control panel, Refresh Mode is canceled.
Light Source Cal‐
ibration
Make settings related to Light Source Calibration.
When performing Light Source Calibration, the difference
between the white balance and the brightness level for the light
source is corrected. We recommend running this function
periodically.
Run Now
: Starts Light Source Calibration. This cannot be
started in the following cases.
- Within 20 minutes of turning on the projector.
- If the surrounding temperature gets too high, and the
brightness has been automatically dimmed.
Run Periodically
: When this is set to
On
, Light Source
Calibration is performed every 100 hours of use. When
Off
is
selected to maintain the projected image that has been adjusted
using Multi-Projection, perform corrections using
Run Now
or set the scheduling function to perform
Light Source
Calibration
periodically.
Schedule Settings
: Displays the schedule settings screen. Set
Light Source Calibration to run periodically.
Last Run
: Displays the last date and time Light Source
Calibration was performed.
List of Functions
163
Summary of Contents for EB-L30000U
