Epson EB-L30000U, User Manual

Page: 132 / 283

By using the projector's LCD display while it is in standby mode, you can
manually set a fixed IP address without projecting any information from
the projector.
a
Make the following settings to set a fixed IP address when the
projector is in standby mode.

Set A/V Output to Always On .
s
Extended - A/V Settings - A/V Output p.147

Set Standby Mode to Communication On .
s
Extended - Standby Mode p.147
a
Connect the projector with a wired LAN, and then turn on the
main power switch.
b
Hold down the [LAN] button on the control panel for at least three
seconds.
The static IP address setting menu is displayed on the LCD display.
a
Press the [Esc] button to cancel the settings.
c
On the control panel or the remote control, press the buttons in
the order [
], [ ] to select OFF , then press the [ ] button.
d
On the control panel or the remote control, use the [ ][ ]
buttons to change the values, use the [ ][ ] buttons to move the
input position and set the IP address, and then press the [ ]
button.
a
You can also make settings by pressing the numeric buttons on
the remote control.
e
Continue to set the subnet mask and gateway address if necessary,
and then press the [
] button on the confirmation screen.
f
Press the [ ] button to return to the status information screen.
Setting a Static IP Address Using the LCD Display
132