The settings for the image currently displayed and values for geometry
correction are saved as a memory, allowing you to load them when
necessary.
Saving/Loading/Erasing/Resetting the Memory
a
Press the [Memory] button while projecting.
a
You can also operate from the Configuration menu.
s
Settings
-
Memory
b
Select a memory type, and then press the [
] button.
Memory
: Settings for the following menu items are saved in the
memory. You can register up to 10 values.
Top Menu
Submenu
Image
All setting items
Signal
Overscan
Video Range
Scale
Settings
Brightness Settings
Extended
Edge Blending
Black Level
Color Matching
Lens Position
: Registers the position of the lens adjusted using lens
shift, zoom, focus, and distortion. You can register up to 10 values.
s
"Registering and Loading Lens Adjustment Values"
Geometry Correction
: Adjustment value of the geometry correction
is saved. You can register up to 3 values.
a
If the projector cannot determine the model number of your
lens, you cannot save or load memories for
Lens Position
and
Geometry Correction
.
c
Select the function you want to perform, then press the [
]
button.
Memory Function
109
Summary of Contents for EB-L30000U
