Epson EB-L30000U User Manual Download

Page: 25 / 283

Name

Function

[ID] switch

Use this switch to enable (On)/disable (Off) ID settings for
the remote control.

"ID Settings"

p.43

Remote port

Connects the optional remote control cable set and
outputs signals from the remote control.

"Optional Accessories"

p.252

When the remote control cable is plugged into this remote
port, the remote control light-emitting is disabled.

[ ] button

Displays the Info menu from the Configuration menu.

"Info Menu (Display Only)"

p.161

[Num] button

Hold down this button and press the numeric buttons to
enter passwords and numbers.

"Setting Password Protection"

p.115

[

] [

]

] buttons



Changes the test pattern displayed.



Moves to the previous or next image file when
projecting images from a computer connected via a
network.

[Geometry] button

Corrects distortion in the projected image.

"Correcting Distortion in the Projected Image"

p.62

[Test Pattern] button

Displays a test pattern.

"Displaying the Test Pattern"

p.36

[Distortion] button

Press to correct distortion.

"Correcting Distortion (Image Warping)"

p.41

[Shutter] button

Press to turn the image on or off temporarily.

"Hiding the Image Temporarily (Shutter)"

p.106

[Esc] button



Stops the current function.



If pressed when the Configuration menu is displayed, it
moves to the previous level.

"Configuration Menu Operations"

p.137

Name

Function

[Memory] button

Performs operations and makes settings for the memory
function.

"Memory Function"

p.109

[Color Mode] button

Each time the button is pressed, the Color Mode changes.

"Selecting the Projection Quality (Selecting Color

Mode)"

p.74

[Search] button

Changes to the next input source that is sending an image.

"Automatically Detecting Input Signals and Changing

the Projected Image (Source Search)"

p.60

[

] button

Illuminates the buttons on the remote control for
approximately 15 seconds. This is useful when using the
remote control in the dark.

Indicator

A light is emitted when outputting remote control signals.

Remote control light-
emitting area

Outputs remote control signals.

Handy remote control operations

You can perform the following operations by simply pressing one of the
buttons on the remote control.

Operation

Set

Reverse the projected image vertically.
(Switch the

Projection

between

Front

and

Front/Ceiling

)

"Changing the direction of the image

(projection mode)"

p.34

Hold down the [Shutter] button for more
than five seconds.

Selecting the password security settings.

"Managing Users (Password

Protection)"

p.115

Hold down the [Freeze] button for more
than five seconds. The Password Protection
screen is displayed, and you can select
various settings.

Part Names and Functions

Summary of Contents for EB-L30000U




























































































































































































































































































Search results

Summary of Contents for EB-L30000U

Reviews:

Related manuals for EB-L30000U

Brands by name

Popular brands

Epson EB-L30000U, User Manual

Search results

Summary of Contents for EB-L30000U

Reviews:

Related manuals for EB-L30000U

Brands by name

Popular brands