Epson EB-L30000U, User Manual

Page: 221 / 283

This section explains how to replace the air filter.
Replacing the Air Filter
Air filter replacement period
If the message is displayed frequently even though the air filter has been
cleaned, replace the air filter.
Attention
When using the projector in smoky environments such as at events and so
on, make sure you replace the air filter after approximately 240 hours of use.
(This is a guideline when using the projector in an environment with an
atmospheric concentration of ondina oil of approximately 0.000000013%. The
air filter replacement time may be shorter depending on the operating
environment.)
Using the projector in a smoky environment may cause the filter's dust
collection function to decline and dust may adhere to the inside of the
projector or the power supply; this may cause a malfunction to occur.
Replacing the air filter
This projector has one air filter on the front and two on the sides. This
explanation uses the air filter on the front as an example.
a
After you turn off the projector's power and the confirmation
buzzer beeps, disconnect the power cord.
b
Remove the air filter cover screw.
c
Open the air filter cover.
Replacing Consumables
221