Epson AcuLaser C3000 Series, Service Manual

Page: 468 / 680

EPSON AcuLaser C4000/C4100/C3000 Revision F
Disassembly and Assembly Disassembly Assembly Procedures 4-453
26. SENSOR NO PAPER (PL17.3.4) Removal
27. Shift the ROLL ASSY TURN to the right and left side, remove the ROLL
ASSY TURN from the shaft hole of the FRAME ASSY DRIVE (PL17.3.25).
TRAY 3
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the COVER L. (See Section 4.2.20.3.)
4. Remove the CHUTE ASSY TURN. (See Section 4.2.20.4.)
5. Remove the HARNESS ASSY FDR 3T (blue). (See Section 4.2.20.6.)
6. Remove the GUIDE ASSY CASSETTE R. (See Section 4.2.20.11.)
7. Remove the GUIDE ASSY CASSETTE L. (See Section 4.2.20.12.)
8. Remove the LINK ACTUATOR. (See Section 4.2.20.13.)
9. Remove the PICK UP ASSY TR3. (See Section 4.2.20.15.)
10. Remove the SPRING FEED H. (See Section 4.2.20.23.)
11. Remove the SOLENOID FEED. (See Section 4.2.20.22.)
12. Remove the SPRING FEED 1. (See Section 4.2.20.24.)
13. Remove the GEAR FEED H2. (See Section 4.2.20.25.)
14. Remove the GEAR FEED 1. (See Section 4.2.20.26.)
15. Remove the GEAR FEED H1. (See Section 4.2.20.27.)
16. Remove the GEAR FEED 2. (See Section 4.2.20.28.)
17. Remove the STOPPER CLUTCH. (See Section 4.2.20.29.)
18. Remove the CLUTCH ASSY TURN. (See Section 4.2.20.30.)
19. Remove the GEAR IDLER. (See Section 4.2.20.31.)
20. Remove the GEAR IDLER FEED. (See Section 4.2.20.32.)
21. Remove the GEAR IDLER IN. (See Section 4.2.20.33.)
22. Remove the BEARING of the ROLL ASSY TURN. (See Section 4.2.20.38.)
23. Remove the BEARING SLEEVE of the ROLL ASSY TURN.
(See Section 4.2.20.39.)
24. Shift the ROLL ASSY TURN to the right and left side, remove the ROLL
ASSY TURN from the shaft hole of the FRAME ASSY DRIVE (PL17.3.25).