Epson AcuLaser C3000 Series, Service Manual

Page: 503 / 680

EPSON AcuLaser C4000/C4100/C3000 Revision F
AcuLaser C4100 Product Descriptions 7-488
RESET MENU
List
NETWORK MENU
List
*1: When this setting is changed, the setting value becomes valid after warm boot or
restarting the printer.
The setting value is reflected immediately to the Status Sheet and EJL read-back,
however it is changed in practice after warm boot or restarting the printer.
*2: This is displayed and can be selected only when Network Config = Yes.
*3: This is displayed current values and can not be changed when “Get IPAddress =
Auto” is set.
When the setting “Get IPAddress = Auto” is changed to “Panel” or “PING“, the value
set up at the time of “Panel” or “PING“ set before “Panel is displayed.
Item Value
Clear Warning
Clear All Warning
Reset
Reset All
SelecType Init
Item Value
Network I/F On , off
Network Config No , Yes
Get IPAddress *2 Panel, Auto , PING
IP *2*3 0.0.0.0 ~ 192.168.192.168 ~ 255.255.255.255
SM *2 0.0.0.0 ~ 255.255.255.0 ~ 255.255.255.255
GW *2 0.0.0.0 ~ 255.255.255.255
NetWare *2 On , Off
AppleTalk *2 On , Off
MS Network *2 On , Off
Rendezvous *2 On , Off
Link Speed *2 Auto , 100 Full, 100 Half, 10 Full, 10 Half
Buffer Size Normal , Maximum, Minimum