Epson AcuLaser C3000 Series, Service Manual

Page: 391 / 680

EPSON AcuLaser C4000/C4100/C3000 Revision F
Disassembly and Assembly Disassembly Assembly Procedures 4-376
4.2.10.14 PLATE ASSY BOTTOM MSI (PL7.1.42) Removal
1. Remove the FUSER ASSY. (See Section 4.2.12.1.)
2. Remove the COVER ASSY TOP MAIN. (See Section 4.2.4.4.)
3. Remove the COVER ASSY FRONT HEAD. (See Section 4.2.4.2.)
4. Remove the COVER MSI. (See Section 4.2.4.11.)
5. Remove the TRAY ASSY MSI. (See Section 4.2.4.12.)
6. Remove the COVER ASSY FRONT IN. (See Section 4.2.4.13.)
7. Remove the COVER ASSY FRONT. (See Section 4.2.4.10.)
8. Remove the COVER SIDE L. (See Section 4.2.4.14.)
9. Remove the COVER SIDE R. (See Section 4.2.4.9.)
10. Remove the STRAP. (See Section 4.2.5.2.)
11. Remove the CHUTE ASSY OUT. (See Section 4.2.10.1.)
12. Remove the SOLENOID FEED MSI. (See Section 4.2.10.12.)
13. Remove the SHAFT ASSY ROLL FEED. (See Section 4.2.10.13.)
14. Remove the 2 screws (gold, tapped, 10mm) securing the PLATE OUT MSI
(PL7.1.35) to the CHUTE ASSY OUT (PL7.1.1).
15. Remove the PLATE OUT MSI along with the PLATE ASSY BOTTOM MSI
from the CHUTE ASSY OUT.
16. Remove the PLATE ASSY BOTTOM MSI from the PLATE OUT MSI.
Figure 4-73. PLATE ASSY BOTTOM MSI (PL7.1.42) Removal
C A U T I O N
When performing the following step, release the actuator of
the ACTUATOR MSI (PL7.1.37) from the hole in the PLATE
ASSY BOTTOM MSI (PL7.1.42).
HANABI_BE_CHAP03_175FA