Epson 6110i - PowerLite XGA LCD Projector, User Manual

Page: 77 / 130

Monitoring the Projector Over a Network
77
■ SNMP
If you’re a network administrator, you can use the SNMP
option to enter a Trap IP Address. This lets you receive trap
alerts for the projector on a computer running the SNMP
Manager software.
■ Mail
When enabled, the projector sends you an e-mail alert if it has
any problems. For instructions on setting up e-mail alerts, see
the next section.
■
AMX Device Discovery
Allows the projector to be detected when it’s connected to an
AMX™ controller or a network that supports AMX Device
Discovery.
■
Projector Name
Displays the name for identifying the projector over the
network.
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the
Menu
button, select the
Network
menu, and press
Enter
.
2. Select
Mail
and press
Enter
.
3. Select the following settings as necessary:
■ Mail Notification
Select
On
to enable sending of an e-mail if there is a problem
with the projector.
■ SMTP Server
Enter the IP address of your SMTP server. You can enter a
number from 0 to 255 in each field of the address.
■ Port Number
Displays the SMTP port number.
note
If you’re a network
administrator, you can use
the
SNMP
option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you’re monitoring.
note
You can also set e-mail alerts
from EMP Monitor (see
page 82).