Chapter 1
Introduction & Safety
1-4
1.5. Safety labels
This section provides the details of all of the warning labels that are on the
ULTRA
.
1.5.1. Laser safety
The US Food and Drug Administration requires the inclusion of laser safety information and labels,
pursuant to 21
CFR
, Chapter 1, Subchapter J, Laser Product Performance Standard, Section 1040.10
(h). There is no possibility of exposure to laser radiation during machine operation. Therefore, the
ULTRA
is a
CDRH
Class 1 device. The label shown in Figure 1-1 shows that the
ULTRA
meets Class 1
criteria.
FIGURE 1-1.
Laser Compliance Label
When performing the scanner maintenance tests, it is possible to be exposed to HeNe (633 nm) laser
radiation levels up to Class IIIa. This maintenance test is only performed by Envipco service techni-
cians. The label in Figure 1-2 gives the appropriate warning. Figure 1-3 shows the location of the laser
danger label.
Warning!
Use extreme caution when operating a compactor with the doors open.
Keep your body and loose clothing well away from moving parts. Make
sure that no one else is near the machine during this process.
Warning!
Do not allow water to come in contact with the electrical components.
Warning!
Use gloves and eye protection when opening and emptying a glass
machine.
Glass dust can cause eye injury.
CLASS I LASER PRODUCT
CHAPTER I SUBCHAPTER J
PN 300406
U.S. DHHS STANDARD 21 CFR
PRODUCT COMPLIES WITH
Summary of Contents for U48DFF
