4-7
Diagnostic Program
4.4. Diagnostic Program
The Diagnostic Program allows you to test components and configure the
RVM
. The topics in this sec-
tion correspond with the tabs in the Diagnostic Program:
•
Processes
•
Misc
•
Main
•
Ultra-48
•
RS-485
•
Config
4.4.1. Processes Tab
The Processes tab, shown in Figure 4-7, gives an overview of
ULTRA
’s software processes. Each column
provides options for a different process. It displays the version of each process and some options for
each. The
Save Config
and
Quit
buttons are not used in the field.
FIGURE 4-7.
Diagnostics - Processes Tab
1.
Hardware Process - Controls the internal data communications of the
RVM
,
which are conveyed through an
RS
-485 serial bus. The
RS
485-Port
button resets
the
RS
-485 port on the
PC
board. Its purpose is to diagnose internal communica-
tions errors.
Summary of Contents for U48DFF
