4-5
Service Mode
4.
RVM Software
. This option expands the Technician Interface to include
advanced options to create and restore software backups and to upload new
RVM
software. These options are described in Section 6 on page 4-5.
5.
Start Diagnostic
. This option starts the Diagnostic Program, which is described
6.
Edit Parameters
. This option is not yet implemented.
4.3.3. Exiting Service Mode
To exit Service Mode, go to the Technician Interface screen, and tap
Release Jump Drive
. You will then
see a button to exit Service Mode, as shown in Figure 4-5. If you do not tap the option to exit Service
Mode, Service Mode times out five minutes after removing the Jump Drive. In this case, an icon on the
display indicates that Service Mode will time out. This screen is shown in Figure 4-6.
FIGURE 4-5.
Exiting Service Mode
Summary of Contents for U48DFF
