5-5
Component Maintenance
FIGURE 5-2.
Hecon X56 Printer
5.3.7. AC Motor Control Box
Visually inspect the power cord and receptacle for damage. If needed, replace the damaged parts or call
for electrical service.
5.3.8. In-Feed Unit
Follow these procedures to keep the In-Feed unit in working order:
1.
Clean the feed belt and rollers using Cleaning Mode. See Section 5.3.1 “Cleaning
Mode” on page 5-2.
2.
Clean the scanner windows with glass cleaner and a soft cloth. Do not use any
other cleaner on the scanner, as streaks can interfere with scanner function.
Caution!
When cleaning a glass machine, use canned air to remove glass dust
from sensor lenses, scanner windows, and reflector targets before clean-
ing them with a cloth or paper towel. Otherwise, the dust will scratch
the surfaces and damage the equipment.
Summary of Contents for U48DFF
